Bio-LogicBio-Logic Science Instruments — Authorized Distributor for Türkiye
+90 (312) 437 40 77  ·  [email protected]
TR/EN
Get a Quote
Potentio Galvano Scan
Entek ElektronikEntek Design

Potentio Galvano Scan

Entek Design — Potentiostat / Galvanostat

Potentiostat/galvanostat with analog and digital displays, up to 1 A, made in Türkiye

  • Current range: 0.1 mA – 1 A full scale, 9 ranges; ±0.1% accuracy on every range
  • Operating limits ±35 V / 1.2 A; maximum output power 40 W
  • Bandwidth 2 MHz (potentiostatic mode), output slew rate 75 V/ms
  • Reference electrode input 10¹² Ω; input impedance > 10 MΩ
  • Built-in scanner: ±5 V, 6-step scan rate (0.001 – 1000 mV/s, up to 5000 mV/s with ×1/2/5)
Request a quoteCatalogue / Documents
EntekManufacturer: Entek Elektronik, İvedik OSB, Ankara · Designed and manufactured in Türkiye

Overview

A potentiostat/galvanostat workstation designed and manufactured in Ankara by Entek Elektronik. With a ±10 V control input, 2 MHz bandwidth and nine current ranges up to 1 A, it is an economical solution for university laboratories and R&D departments running classical electrochemical techniques such as voltammetry, polarization and chronoamperometry.

The built-in voltage scanner (±5 V, 0.001 – 5000 mV/s) allows stand-alone CV/LSV experiments; X-Y recorder outputs and galvanostatic mode are standard. The advantage of local manufacturing: fast technical service, spare parts and customization to the researcher's requirements.

Applications

General electrochemistryTeaching laboratoriesCorrosion and coatings

Key features

  • Current range: 0.1 mA – 1 A full scale, 9 ranges; ±0.1% accuracy on every range
  • Operating limits ±35 V / 1.2 A; maximum output power 40 W
  • Bandwidth 2 MHz (potentiostatic mode), output slew rate 75 V/ms
  • Reference electrode input 10¹² Ω; input impedance > 10 MΩ
  • Built-in scanner: ±5 V, 6-step scan rate (0.001 – 1000 mV/s, up to 5000 mV/s with ×1/2/5)
  • Analog (centre-zero) and 3.5-digit digital displays; OVERLOAD warning
  • Signal-to-noise ratio > 80 dB; short-circuit-protected outputs

Technical specifications

Potentio Galvano Scan technical specifications
Input impedance> 10 MΩ (control input); reference electrode input 10¹² Ω
Input limits±10 V (20 V total), two independent input terminals
Bandwidth2 MHz (potentiostatic mode)
Output slew rate75 V/ms
Operating limits±35 V, 1.2 A; max. output power 40 W
Current rangeFull scale 0.1 / 0.3 / 1 / 3 … 300 / 1000 mA (9 ranges)
AccuracyFull scale, at least ±0.1% on every range
DisplaysAnalog (anodic/cathodic) + 3.5-digit digital (0.2 / 2 / 20 V full scale)
Voltage scanner±5 V; 0.001 – 1000 mV/s (6 steps), ×1/2/5 multiplier; 10-turn fine adjustment
Output terminalsRecorder Y axis (current, 1 V full scale), X axis (scan voltage); potential output in galvano mode
Signal-to-noise> 80 dB
ProtectionOutput terminals short-circuit protected
Supply220 V / 50 Hz ±15%
Warranty1 year

Source: Entek Elektronik product documents and user manuals. Specifications are subject to change without notice.

Documentation

PDFPotentio Galvano Scan datasheet (English)Entek Elektronik document · downloaded from the Entek serverPDFPotentio Galvano Scan datasheet (Turkish)Entek Elektronik document · downloaded from the Entek server

Frequently asked questions

Which applications is this instrument suitable for?
General electrochemistry, Teaching laboratories, Corrosion and coatings. Where you cannot confirm measurement suitability, our technical team proposes a configuration based on your application.
How are installation, training and warranty provided?
Installation, software training and after-sales technical support are provided by Entek Elektronik in Türkiye. Warranty and service terms are stated in writing in the quotation.
In which language are the technical documents?
Manufacturer catalogues and brochures are in their original English; Entek datasheets are available in English and Turkish. Manufacturer documents are the authoritative source for official, current technical data.

Similar and comparable products

Polarographic Analyzer
Entek Elektronik

Polarographic Analyzer

DC, sampled DC, pulse and differential pulse polarography
  • Initial potential −5 … +5 V, 1 mV resolution; absolute scale accuracy 0.25%
  • Scan rate 1 – 500 mV/s; scan range ΔE = 0.75 / 1.5 / 3 V
  • Modes: DC, Sampled DC, Pulse, Differential Pulse
DetailsRequest a quote
C-4 Cell Stand
Entek Elektronik

C-4 Cell Stand

Microprocessor-controlled three-electrode cell stand: stirring, gas purging, Faraday cage
  • Microprocessor control; all parameters and remote/local commands monitored on the LCD
  • Magnetic stirrer 50 – 800 RPM, continuous (stepless) speed setting
  • Gas purging manually or remotely; easy gas tube connection
DetailsRequest a quote
RDE-4 — Rotating Disc Electrode System
Entek ElektronikRDE

RDE-4 — Rotating Disc Electrode System

Digital speed control, timed gas purge and gas blanket line; remote control from the potentiostat — compatible with all potentiostats
  • Digital speed control; LOCAL / SET / REMOTE operation
  • Remote speed control: 0 – 10 V analog input = 0 – 10,000 RPM; analog speed output
  • ROTATE and PURGE logic inputs; active level (0/1) configurable
DetailsRequest a quote
SP-50e
Bio-LogicEssential

SP-50e

Cost-effective and easy to use — for teaching and general use
  • 1 channel, ±10 V, ±1 A (down to 20 nA)
  • Built-in EIS option: up to 1 MHz
  • Compact, easy-to-use chassis
DetailsRequest a quote

Is this instrument right for your research?

Our technical team evaluates the configuration and alternatives according to your measurement needs.

Technical discussion and quotation